Grid Tie Micro Inverter 600/1200W 110/220V MPPT Waterproof

Original price was: $275.00.Current price is: $157.00.

SKU: ICSMI-134 Categories: ,


MPPT TECHNOLOGY – Precise maximum power point tracking. MPPT algorithm can optimize the power collection from solar panels. It accurately captures and collects sunlight, and locks in the maximum output power points, significantly increasing over 25% of the power generation. With the monitoring system, it can help you monitor the power generation efficiency of the power station and reduce workforce expenses.
HIGH PERFORMANCE – Reverse power transmission. With efficient reverse power transmission technology, the power transmission rate up to 99.9%. Full digital control can be achieved by using intelligent soft switching technology and built-in MCU for charging modules; Introducing high-frequency switching power supply and SPWM control technology. It features strong anti-interference ability, fast calculation speed, a high degree of intelligence, high control precision, and excellent output waveform.
PROTECTIVE & RELIABLE – IP65 waterproof design and aluminum alloy material can effectively prevent rainwater erosion on the surface. It provides electrical isolation, more reliable to use. It offers multiple protection functions, such as over-current protection, short circuit protection, low-voltage protection, over high voltage protection.
FLEXIBLE INSTALLATION- In order to satisfy higher power requirements, the solar micro inverter can be used in stacks, and the number of stacks is unlimited, which can form a single-phase parallel stack system. After the power station is installed, there is almost no need to do maintenance work.
SUSTAINABLE USE – This solar power grid-tie micro-inverter can convert DC power generated by solar panels into AC power. Our solar inverter provides sustainable energy and brings excellent environmental benefits.

Friendly Note:
This is a Grid-Tie inverter, which means connecting the Grid power to the “AC output” would be necessary for Grid-tie power generation. Please check the voltage is 110V or 220V as well, different options according to the Grid voltage.
If taking the solar panels as the input instead of batteries, “VOC” Voltage should be set in the range of 30-48V, the solar panels’ power is set 20% bigger than the inverter’s output power would be recommended. E.g. for the 600W inverter, the total solar panels’ total output power should be 700-750W. For the 1200W inverter, the total power should be 1200~1400W.
If taking the battery packs as input, 36V battery packs would be firstly recommended, three 12V batteries are connecting in series to 36V would be fine. When wires the inverter, please follow the indication in the inverter, Pos (+) to Pos (+), Neg(-) to Neg (-). Regarding the battery’s capacity, 36V/10mah to 300W, 36V/20mah to the 600W inverter, and 36V/40-45mah to the 1200W inverter.
Please check the configuration, input and output voltage are totally in the allowance, ensure the inverter could run normally and Grid to Grid generation.

Technologic Features:
Precision MPPT Operation:
When the MPPT function is adjusted to the maximum power point, the product automatically locks the power at the maximum power point to increase the generating capacity by 25% and make the output power more stable.
Reverse Power Transmission:
The efficient power reverse transmission technology means that the unused power is transmitted to other places in the opposite direction of the gridthe power transmission rate up to 99.9% with higher efficiency.
Digital SPWMControl:
The digital SPWM control technology is characterized by strong anti-interference ability, fast calculation speed, high intelligent degree, high control precision, and excellent output waveform.
IP65 & Aluminum Material:
The inverter adopts an IP65 waterproof design, has no influence on low-pressure/ high-pressure injection at any Angle. This solar inverter shell is made of aluminum alloy material, which is anti-vibration and anti-deformation.
Easy to Install:
Multiple micro grid-tie inverters are constructed with stacked arbitrarily to achieve a higher power output function. This solar micro inverter is miniaturized, smaller, and lighter in volume for more convenient and straightforward installation.
Wide Usage:
It is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances.
300W/600W/1200W Solar Grid Tie Inverter:
The listing is about 300W/600W/1200W solar grid-tie inverter, which inverts DC to AC 110V/220V and efficiently turns sunlight into clean power. It features the high-performance MPPT (Maximum Power Point Tracking) function and the reverse power transmission technology for efficient use. It is designed to convert the DC power generated by solar panels into AC power available for household appliances.

Recommended Input Power: 300W/600W/1200W.
Maximum Input DC Voltage: 50V.
Maximum Input Current: 25A/9.8A.
Output Voltage: 230V AC.
Min/Max Start Voltage: 22-50V.
Operating Voltage Range: 80-160V AC/180-260V.
Rated Frequency Range: 47-52.5 Hz/57-62.5 Hz.
Rated Output Power: 550W/1150W.
Rated Output Current: 2.3A/4.58A/5A/9.58A/0.92A.

Package Content:
1 x Grid Tie Inverter.
1 x Power Cable.
1 x Set of Mounting Accessories.
1 x Product Manual.
1 x Tee Connector

Additional information


1200W 110V


There are no reviews yet.

Be the first to review “Grid Tie Micro Inverter 600/1200W 110/220V MPPT Waterproof”

Your email address will not be published. Required fields are marked *

This field is required.